Ignition -BGM PRO stator HP V2.5 silicone- Vespa PX EFL – 5 wires
- Description
- Reviews (0)
- Add a review
Description
Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition.
BGM has reworked the BGM PRO ignition base plate, which has proven itself a thousand times over, and made it even better.
A significantly higher light output than with conventional base plates is complemented by a very high quality of coils and pickup.
In addition, the cabling has been changed to textile-sheathed silicone cables.
Another nice detail is the degree exact division of the adjustment markings. This allows the plate to be adjusted very quickly and easily.
The advantages resulting from this compared to conventional PVC pipes (as for example with original Piaggio base plates) are manifold.
ADVANTAGES OF SILICONE LINES
- Extremely temperature resistant (-40°C to +250°C))
- Always remains flexible
- Very good mechanical protection by the textile fabric
- Resistant to fats, oils, alcohols, oxygen, ozone
- Very high insulation properties
The BGM PRO HP ignition base plate is designed as a high-quality 1:1 replacement for an original ignition/alternator.
It can be replaced without modifications. The higher light output does not require any other illuminants.
Of course, the well-known features have also been retained:
- Proven exciter coil with copper plate for highest reliability
- Pickup with carbon barrier layer for a clean ignition pulse
- Cleanly processed HP light coils
- High quality solder joints
- Original cable lugs and length for very easy cabling
NOTE: The BGM pickup has a nominal resistance of 100 Ohm (+/- 10Ohm)
FITS :
- Vespa (Motovespa) PX 125 Iris (engine 99M)
- Vespa (Motovespa) PX 150 Iris (engine 75M)
- Vespa (Motovespa) PX 200 Iris (engine 73M)
- Vespa (Motovespa) PX 200 Iris (engine 76M)
- Vespa (Motovespa) PX 200 Iris (engine 77M)
- Vespa (Motovespa) TX 200
- Vespa (Piaggio) Cosa 150 CL (VLR1T)
- Vespa (Piaggio) Cosa 150 CLX (VLR1T300)
- Vespa (Piaggio) Cosa 150 FL (VLR2T)
- Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
- Vespa (Piaggio) Cosa 125 CL (VNR1T)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T300)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T301)
- Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
- Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
- Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
- Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
Related Products
Piston -BGM PRO 177/187cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) – Ø=63.0mm (A)
Engine €59,09 Incl. VAT + Add to cart
Bearing driveshaft selector box 28,3×42,3×9,5 mm for Vespa 125 VNA/VNB/GT 1°/Super 1°/150 VBA/VBB/VGLA/B/GL/Sprint 1°/Super 1°
ACMA €17,26 Incl. VAT + Add to cart
DELLORTO Gasket repair kit SI20/20 & SI24/24 Vespa PX 80/125/150/200
Carburator Parts €5,87 Incl. VAT + Add to cart
Hi-speed Variator Vespa 125 / 150 GTS 2017-2021
GTS 125 4T
€108,30 €92,05 Incl. VAT
+ Add to cart
Be the first to review “Ignition -BGM PRO stator HP V2.5 silicone- Vespa PX EFL – 5 wires”