Rust Remover OWATROL oil 500 ml

PROPERTIES

• Penetrating rust inhibitor
• Stops rust and protects the base metal from further rusting
• Penetrates and protects down to the sound metal.
• Drives out moisture and air and stabilises

Leaves a bonding film on all surfaces

• Excellent adhesion including on galva, alu, zinc, wood …
• Maintains the natural look of the surface (metal, wood, etc.)
• Enhanced adhesion, ideal foundation for primers or finishing coats.
• Allows paint to be applied direct to firm rust.
• Heat resistance up to +175°C

Paint Conditioner o Makes alkyd paint rust inhibiting

• Improved paint flow and workability
• Better viscosity which allows painting to be carried out in cold, warm or windy conditions.
• Replaces damaging thinners; improves hiding power of paint.

Wood impregnation

• Deeply penetrates and seals wood.
• Protects metal parts.

WHERE TO USE

• Ferrous and non ferrous metals. (may be applied on wood, plastics, glass,…)
• Lightly to heavily rusted surfaces. • On new surfaces, use OWATROL AP60
• May be used in any oil based paints, air drying alkyds, lacquers and varnishes, one component urethanes and asphalt / petroleum based paints. May be mixed with oil based stains/paint to improve impregnation of wood and protection of metal surfaces (hinges and fittings)
• Do not mix with quick drying paints (car paints), chlorinated rubber paints, with two components paints and water based paints (see OWATROL-EB and FLOETROL)

DIRECTIONS FOR USE

• Ensure surface is clean, dry and free from oil, grease and scale
• Owatrol Oil can achieve better results on rusted surfaces because it uses the rust as a pigment to form a protective coating.
• To make paint rust inhibiting, mix 25% Owatrol Oil, 75% paint.
• To improve paint flow, mix 5-10 % Owatrol Oil with paint