Shock absorber rear -CIF 330mm- Vespa PX80, PX125, PX150, PX200, T5 125cc, Rally180, Rally200, Sprint150, GT125, GTR125, TS125, V50, PV, ET3 – black
- Description
- Reviews (0)
- Add a review
Description
CIF shock absorbers are produced in Italy and have a solid quality.
Already for more than 50 years on the market CIF is known as a supplier of high quality and reliable Vespa spare parts.
The CIF shock absorbers are available individually as well as in sets. The sets also include the so-called silent rubbers. Together with the new shock absorbers the handling is raised to the level of a new vehicle or even improved with the tuning variants.
Available are the lines:
- OEM:
- corresponds to a new series chassis
- SPORT ELEGANT:
- oil pressure, somewhat more tightly damped than series, spring preload adjustable, discreet colours
- SPORT TUNING:
- oil pressure, slightly tighter damping than standard, spring preload adjustable, red/black colouring
TIP: The spring preload setting on the adjustable suspension struts is only used to adapt to the rider’s weight. Choose the preload so that after climbing on the vehicle the spring struts are immersed for about 1-2cm. This is the so-called negative suspension travel. If the negative suspension travel is reduced by a too large preload, the vehicle starts to jump and move on uneven ground. Increase the preload for larger loads (permanent two-man operation, a lot of luggage etc.) compared to solo operation. This ensures maximum riding comfort and safety.
(US)
Note: Vehicles built in 2000 and later require a spacer of at least 48mm length (see accessories).
FITS :
- Vespa (Augsburg) Vespa 160 GS/4 (type 382, VSB1T)
- Vespa (Motovespa) Vespa 200 DS (engine 9DS)
- Vespa (Piaggio) Vespa 50 L (V5A1T)
- Vespa (Piaggio) Vespa 50 N (V5A1T)
- Vespa (Piaggio) Vespa 50 (V5A1T, 1963)
- Vespa (Piaggio) Vespa 50 S (V5A1T, 1964)
- Vespa (Piaggio) Vespa 50 Special (V5A2T)
- Vespa (Piaggio) Vespa 50 Special Elestart (V5A3T)
- Vespa (Piaggio) Vespa 50 Special (V5B1T)
- Vespa (Piaggio) Vespa 50 Special Elestart (V5B2T)
- Vespa (Piaggio) Vespa 50 Special (V5B3T)
- Vespa (Piaggio) Vespa 50 Special Elestart (V5B4T)
- Vespa (Piaggio) Vespa 50 Sprinter (V5SS2T, -1975)
- Vespa (Piaggio) Vespa 50 SR (V5SS2T, 1975-)
- Vespa (Piaggio) P 80 X (V8X1T, -1983)
- Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-)
- Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990)
- Vespa (Piaggio) Vespa 90 (V9A1T)
- Vespa (Piaggio) Vespa 90 Super Sprint (V9SS1T, SS90)
- Vespa (Piaggio) Vespa 150 Super (VBC1T)
- Vespa (Piaggio) Vespa 150 Sprint (VLB1T)
- Vespa (Piaggio) Vespa 150 Sprint Veloce (VLB1T)
- Vespa (Piaggio) Vespa 125 GTR (VLB2T)
- Vespa (Piaggio) P 150 X (VLX1T, -1980)
- Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
- Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
- Vespa (Piaggio) Vespa 125 Nuova (VMA1T)
- Vespa (Piaggio) Vespa 125 Primavera (VMA2T)
- Vespa (Piaggio) Vespa 125 ET3 (VMB1T)
- Vespa (Piaggio) Vespa 125 Super (VNC1T)
- Vespa (Piaggio) Vespa 125 GT (VNL2T)
- Vespa (Piaggio) Vespa 125 TS (VNL3T)
- Vespa (Piaggio) P 125 X (VNX1T, -1983)
- Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
- Vespa (Piaggio) PX 125 T5 (VNX5T)
- Vespa (Piaggio) Vespa 160 GS/4 (VSB1T, 1962, GS4)
- Vespa (Piaggio) Vespa 160 GS/4 (VSB1T, 1963, GS4)
- Vespa (Piaggio) Vespa 180 Super Sport (VSC1T, SS180)
- Vespa (Piaggio) Vespa 180 Rally (VSD1T)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
- Vespa (Piaggio) P 200 E (VSX1T, -1980)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
- Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
- Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
- Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
- Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
Related Products
Cluch castle nut -BGM PRO- Vespa Largeframe models (-1995) – clutch nut
Engine €2,95 + Add to cart
Hi-speed Variator Vespa 125 / 150 GTS 2017-2021
GTS 125 4T
€137,09 €116,52 Incl. VAT
+ Add to cart
Crimp terminal – male spade connector 2.8mm Ø=0.5-1.0mm²- DIN 46244 – 10 pcs
Frame €1,67 Incl. VAT + Add to cart
Piston -BGM ORIGINAL- Vespa 200cc – Vespa PX200, Rally200, Cosa200 – 66.5mm
Engine €56,83 + Add to cart
Be the first to review “Shock absorber rear -CIF 330mm- Vespa PX80, PX125, PX150, PX200, T5 125cc, Rally180, Rally200, Sprint150, GT125, GTR125, TS125, V50, PV, ET3 – black”