Primary gear -BGM PRO- Vespa PX200, Rally200 (and tuned 125 cc engines) – 62 tooth (straight)
- Description
- Reviews (0)
- Add a review
Description
number of teeth large primay sprocket: | 62 |
type of teeth: | straight |
combinable primary sprockets: | 23 teeth straight (BGM PRO, DRT primary gear),
24 teeth straight (BGM PRO, DRT primary gear), 25 teeth straight (BGM PRO, DRT primary gear) |
BGM primary wheels are bullet proof. Developed for the enormous power and torque of today’s engines, they are made of a high-alloy steel (SCM415 / 15 CrMo 5) to the highest manufacturing standards. The enormously high strength of the base material (up to 1100N/mm2, HRC 58-62) offers a reassuringly safe basis for the production of BGM primary wheels.
The production meets the high level standard for Honda’s transmission production. Every single part receives a test report. BGM thus has a permanent continuous quality assurance system.
- Straightly geared for high-torque engines
- High-quality material 15 CrMo 5
- Precise production according to Honda standard
- Continuous quality control
- Useable with all transmissions manufactured since 1962 (or all with 30mm long primary springs)
- Available with 62 or 63 teeth
- Combinable with straight-toothed BGM Pro coupling pinion for COSA2: 23Z, 24Z, 25Z
- Only mountable with BGM Pro primary repair kit (see accessories)
Characteristic feature of BGM wheels is their black colouring as well as the practical inscription indicating the number of teeth the pinion has.
The straight-toothed BGM primary drive parts are designed for today’s very powerful and high-torque engine generations. Their possible reduction ratio is significantly higher than that of their helical counterparts.
The possible combination with the straight-toothed BGM Pro clutch pinions with 23, 24 or 25 teeth covers a transmission ratio range of 2.67-2.48 (orig. PX200 = 2.82)
TIP: On high-torque motors, the harder BGM primary springs are installed directly during assembly. These do not go so quickly on block and thus ensure the effective smoothing of load peaks by always providing sufficient residual spring travel. In this way, the gearbox and the clutch are considerably protected.
NOTE: Only mountable with BGM Pro primary repair kit (see accessories)
BITTE NOTE: The straight-toothed BGM primary pinions and primary gears cannot be combined with Polini or Malossi parts. The module is chosen differently for the BGM parts for maximum stability.
FITS :
- Vespa (Piaggio) Vespa 180 Rally (VSD1T)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
- Vespa (Piaggio) P 200 E (VSX1T, -1980)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
You may also like…
Exhaust -BGM PRO BigBox SPORT (BBS)- Vespa PX200, Rally200
Exhaust €142,98 Incl. VAT + Add to cart
Gearbox (gear cogs incl. drive shaft) -PIAGGIO- Vespa PX 125-150-200 Lusso (1984-), Disc, My – Cosa 125-150-200 – 12/57, 13/42, 17/38, 21/36 teeth – (when used in 200cc = short fourth gear)
Cosa 125 €298,37 Incl. VAT + Add to cart
Gear selector rod -BGM ORIGINAL- Vespa PX (1984-), T5 125cc, Cosa
Cosa 125 €10,12 Incl. VAT + Add to cart
Parmakit Air filter 62 mm fitment for Dell’orto VHSB 34 mm / Keihin 34-38 mm
Aprilia
€19,18 €17,26 Incl. VAT
+ Add to cart
Related Products
Ignition CDI unit Vespa PX80/125/150/200
Cosa 125 €20,78 Incl. VAT + Add to cart
Piston -BGM ORIGINAL- Vespa 200cc – Vespa PX200, Rally200, Cosa200 – 66.5mm
Engine €56,83 + Add to cart
SIP ROAD 3 VESPA PX 200
Cosa 200 €102,90 Incl. VAT + Add to cart
BGM Manual Choke + Cable 150cm, universal
50 L (V5A1T) €11,72 Incl. VAT + Add to cart
Be the first to review “Primary gear -BGM PRO- Vespa PX200, Rally200 (and tuned 125 cc engines) – 62 tooth (straight)”