Exhaust -POLINI ROAD BOX- Vespa P200E / PX 200 / RALLLY 200
- Description
- Reviews (0)
- Add a review
Description
The Polini Box exhaust is a very good alternative to the well known but aging SIP Road. The Polini outperforms it over the whole rev band, both in power and torque. The early and high torque application makes the Polini Box the ideal touring companion. The well thought out construction of the Polini exhaust makes it possible to keep the low and pleasant noise level of the system permanently.
The Polini Box is built a little wider for more volume but not higher than an original exhaust. This makes it a good choice also on vehicles with low ground clearance (Rally, Sprint and all with 8 inch tyres like VBB,VNB…).
The quality and fit is good, even the exhaust paint on the manifold lasts longer than average. Harmonizes very well with Polini 210/221 and Malossi 210 Sport cylinders.
TIP: choose 2-3 sizes bigger than a SIP Road
NOTE: the exhaust is specifically designed for the PX models. On older vehicles, which were built before the PX series, it is possible that the stop plate of the main stand touches the manifold. Either modify it accordingly or check if a too long distance piece was mounted between shock absorber and frame (Sprint / Rally = 26mm). On the 125-150 cc engines of the Sprint, VBB etc. the engine block should also be provided with a hole for a through exhaust screw. Otherwise the exhaust will only hang on the rear bracket. This is not sufficient in the long run, because it can break off.
FITS :
- Vespa (Motovespa) Vespa 200 DS (engine 9DS)
- Vespa (Motovespa) Vespa 200 DN (engine 9DN)
- Vespa (Motovespa) PX 200 Iris (engine 73M)
- Vespa (Motovespa) PX 200 Iris (engine 76M)
- Vespa (Motovespa) PX 200 Iris (engine 77M)
- Vespa (Motovespa) TX 200
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
- Vespa (Piaggio) P 200 E (VSX1T, -1980)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
You may also like…
Exhaust -BGM PRO BigBox TOURING (BBT)- Vespa PX200, Rally200
Cosa 200 €110,74 Incl. VAT + Add to cart
Crankshaft -BGM Pro Touring (rotary valve) 57mm stroke- Vespa PX200
Cosa 200
€167,23 €158,87 Incl. VAT
+ Add to cart
SIP ROAD 3 VESPA PX 200
Cosa 200 €130,26 Incl. VAT + Add to cart
Carburator -DELLORTO 30mm PHBH BS- CS=34mm
50 L (V5A1T)
€120,58 €108,52 Incl. VAT
+ Add to cart
Related Products
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
Piston -BGM ORIGINAL- Vespa 200cc – Vespa PX200, Rally200, Cosa200 – 66.5mm
Engine €56,83 + Add to cart
SIP ROAD XL VESPA PX 200
Cosa 200 €155,46 Incl. VAT + Add to cart
O-ring set for clutch cover (2 pcs) -BGM ORIGINAL- Vespa PX, T5, GT/GTR (VNL2), TS (VNL3), Super (VNC/VBC), GL150 (VLA), GL150 ACMA (VGL1), Sprint (VLB1), GS160 (VSB), Rally (VSD/VSE), SS180 (VSC), Cosa (VLR/VSR/VNR), Wideframe VM, VN, VNA, VNB, VB,
ACMA €1,57 Incl. VAT + Add to cart
Be the first to review “Exhaust -POLINI ROAD BOX- Vespa P200E / PX 200 / RALLLY 200”