Drive shaft -FA ITALIA- Vespa PX (1984-1988), Cosa (VNR1T, VNR2T, VSR1T), T5
- Description
- Reviews (0)
- Add a review
Description
The FA Italia main shafts are of very good quality and a good replacement for a defective original shaft.
The shaft offered here is suitable for engines built from 1984 onwards with the so-called Lusso gearbox (recognizable by the flat gear cross). Since it has no running surface for an internal shaft seal, it can be used until 1988. If an engine with an internal rear shaft seal (42x27x10mm) is converted (to the conventional external types (30x47x6mm), this main shaft is also suitable for all later years of manufacture until today.
- Shifting cross for wear and tear and best to replace it directly with
- Shoulder rings for correct adjustment of the installation clearance order separately, as required (clearance between gearwheel and shoulder ring max. 0,4mm)
TIP: Can also be used in PX old models, if at the same time the corresponding gearwheels as well as the shift notch of the PX Lusso models from 1984 on are used. This way even an older vehicle can be equipped with the more stable Lusso transmission.
FITS :
- Vespa (Motovespa) PX 150 Iris (engine 75M)
- Vespa (Motovespa) PX 200 Iris (engine 73M)
- Vespa (Motovespa) PX 200 Iris (engine 76M)
- Vespa (Motovespa) PX 200 Iris (engine 77M)
- Vespa (Motovespa) PX 125 T5 Sport Elestart (engine 108M)
- Vespa (Motovespa) PX 125 T5 Sport (engine 98M)
- Vespa (Motovespa) TX 200
- Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-)
- Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990)
- Vespa (Piaggio) Cosa 150 CL (VLR1T)
- Vespa (Piaggio) Cosa 150 CLX (VLR1T300)
- Vespa (Piaggio) Cosa 150 FL (VLR2T)
- Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
- Vespa (Piaggio) Cosa 125 CL (VNR1T)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T300)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T301)
- Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
- Vespa (Piaggio) PX 125 T5 (VNX5T)
- Vespa (Piaggio) Cosa 200 CL (VSR1T)
- Vespa (Piaggio) Cosa 200 CLX (VSR1T300)
- Vespa (Piaggio) Cosa 200 FL (VSR1T301)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
- Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
- Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
- Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
You may also like…
PARMAKIT Big Bore 2 ring cylinder kit 177cc Liquid Cooled Vespa PX 125/150
Engine
€581,07 €522,96 Incl. VAT
+ Add to cart
NEW SPECIAL DEAL
Parmakit Crank Vespa PX 125/150 Advance 105MM
Engine
€180,00 €162,00 Incl. VAT
+ Add to cart
Parmakit 2 ring Piston kit 62,93 mm (177 cc) Vespa PX 125
Cosa 125
€108,61 €97,75 Incl. VAT
+ Add to cart
Related Products
Kickstart spring -OEM QUALITY- Vespa Wideframe V98, V1-V15, V30-V33, VM, VN, VL, VB, GS150 / GS3 (VS1T-VS5T)
ACMA €8,18 Incl. VAT + Add to cart
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
O-ring set for clutch cover (2 pcs) -BGM ORIGINAL- Vespa PX, T5, GT/GTR (VNL2), TS (VNL3), Super (VNC/VBC), GL150 (VLA), GL150 ACMA (VGL1), Sprint (VLB1), GS160 (VSB), Rally (VSD/VSE), SS180 (VSC), Cosa (VLR/VSR/VNR), Wideframe VM, VN, VNA, VNB, VB,
ACMA €1,57 Incl. VAT + Add to cart
Flywheel SIP Touren for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Cosa 125
€133,61 €120,25 Incl. VAT
+ Add to cart
Be the first to review “Drive shaft -FA ITALIA- Vespa PX (1984-1988), Cosa (VNR1T, VNR2T, VSR1T), T5”