Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Vespa Largeframe PX EFL (1984-1993) – PX80, PX125, PX150, PX200, T5 125cc, Cosa – rear hub oil seal 30x47x6mm (external)
- Description
- Reviews (0)
- Add a review
Description
OIL SEAL KIT WITH EXTERNAL REAR HUB OIL SEAL
BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM/Viton®*
WHY FKM/VITON®
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
Current super fuel in Germany already contains up to 5% ethanol per se. In other countries the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with fuels containing ethanol. The BGM PRO FKM/Viton® rotary shaft seals offer perfect protection against this.
In addition, Viton is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to ageing.
SUITABLE FOR
An engine equipped with BGM PRO FKM/Viton® shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown Viton®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM/Viton® shaft seals are therefore suitable for all engines, whether original or tuned high-performance engines.
ADVANTAGES BGM PRO
The BGM PRO shaft sealing rings offer double sealing as an additional feature. All shaft sealing rings that seal to the atmosphere have a so-called dust lip. This is positioned before the actual sealing lip and keeps dust, dirt and moisture away. This further increases the very good stability.
AVAILABLE
The BGM PRO FKM/Viton® oil seals are available individually as well as in sets for almost all Vespa and Lambrettas engines.
*Viton® is a registered trademark of DuPont Dow Elastomers
FITS :
- Vespa (Motovespa) PX 125 Iris (engine 99M)
- Vespa (Motovespa) PX 150 Iris (engine 75M)
- Vespa (Motovespa) PX 200 Iris (engine 73M)
- Vespa (Motovespa) PX 200 Iris (engine 76M)
- Vespa (Motovespa) PX 200 Iris (engine 77M)
- Vespa (Motovespa) PX 125 T5 Sport Elestart (engine 108M)
- Vespa (Motovespa) PX 125 T5 Sport (engine 98M)
- Vespa (Motovespa) TX 200
- Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-)
- Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990)
- Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
- Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
Reviews (0)
- There are no reviews yet.
You may also like…
Crankshaft -BGM PRO, direct intake, stroke = 57mm, conrod = 110mm- Vespa Wideframe VM1T,VM2T, VN1T, VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 125 (19541955), ACMA 150GL (1956-1958), Motovespa 125N (1956-1958) – gudgeon pin Ø15mm (needle roller bea
ACMA €172,73 Incl. VAT + Add to cart
Cylinder -BGM PRO 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-), LML Star 125/150, Stella 125/150
Cosa 125 €247,11 Incl. VAT + Add to cart
Kickstart sprocket -BGM PRO- Vespa PX125, PX150, PX200, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Cosa – teeth 12/12, Ø=20.5mm
Cosa 125 €15,62 Incl. VAT + Add to cart
BGM PRO BigBox SPORT (BBS)- Vespa PX80, PX125, PX150, Sprint, GT, GTR
Exhaust €164,46 Incl. VAT + Add to cart
Related Products
BGM Manual Choke + Cable 150cm, universal
50 L (V5A1T) €14,83 Incl. VAT + Add to cart
Kickstart lever-BGM ORIGINAL- Vespa PX, PE, Cosa – aluminium
Engine €24,36 + Add to cart
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
Piston -BGM ORIGINAL- Vespa 200cc – Vespa PX200, Rally200, Cosa200 – 66.5mm
Engine €56,83 + Add to cart
Be the first to review “Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Vespa Largeframe PX EFL (1984-1993) – PX80, PX125, PX150, PX200, T5 125cc, Cosa – rear hub oil seal 30x47x6mm (external)”