Oil seal 27x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (-1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint (since 1972), TS (since 1972), GT125 (since 1972), GTR125 (since 1972), GL150 (VLA1T) (since 1972))
- Description
- Reviews (0)
- Add a review
Description
BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM/Viton®*.
WHY FKM/VITON®
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
Current super fuel in Germany per se already contains up to 5% ethanol admixture. In other countries the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with fuels containing ethanol. The BGM PRO FKM/Viton® rotary shaft seals offer perfect protection against this.
In addition, Viton is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to ageing.
FIT FOR A motor equipped with BGM PRO FKM/Viton® shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown Viton®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM/Viton® shaft seals are therefore suitable for all engines, whether original or tuned high-performance engines.
ADVANTAGES BGM PRO
The BGM PRO shaft sealing rings offer double sealing as an additional feature. All shaft sealing rings that seal to the atmosphere have a so-called dust lip. This is positioned before the actual sealing lip and keeps dust, dirt and moisture away. This further increases the very good stability.
AVAILABLE
The BGM PRO FKM/Viton® oil seals are available individually as well as in sets for almost all Vespa and Lambrettas engines.
*Viton® is a registered trademark of DuPont Dow Elastomers
FITS :
- Vespa (Motovespa) Vespa 125 CL (engine 9CL)
- Vespa (Motovespa) Vespa 150 CL (engine 9NC)
- Vespa (Motovespa) Vespa 200 DS (engine 9DS)
- Vespa (Motovespa) Vespa 200 DN (engine 9DN)
- Vespa (Piaggio) P 80 X (V8X1T, -1983)
- Vespa (Piaggio) Vespa 150 Super (VBC1T)
- Vespa (Piaggio) Vespa 150 GL (VLA1T)
- Vespa (Piaggio) Vespa 150 Sprint (VLB1T)
- Vespa (Piaggio) Vespa 150 Sprint Veloce (VLB1T)
- Vespa (Piaggio) Vespa 125 GTR (VLB2T)
- Vespa (Piaggio) P 150 X (VLX1T, -1980)
- Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
- Vespa (Piaggio) Vespa 125 Super (VNC1T)
- Vespa (Piaggio) Vespa 125 GT (VNL2T)
- Vespa (Piaggio) Vespa 125 TS (VNL3T)
- Vespa (Piaggio) P 125 X (VNX1T, -1983)
- Vespa (Piaggio) Vespa 180 Rally (VSD1T)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
- Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
- Vespa (Piaggio) P 200 E (VSX1T, -1980)
- Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
- Vespa (Piaggio) Vespa 150 Super (A, VBC)
Reviews (0)
- There are no reviews yet.
You may also like…
Crankshaft -BGM Pro Touring (rotary valve) 57mm stroke- Vespa PX200
Cosa 200
€167,23 €158,87 Incl. VAT
+ Add to cart
Clutch -SC, Largeframe, type Cosa2/FL- for primary gear 67/68 tooth – Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125 (VNC1 , 11001-), Super150 – 22 tooth
Cosa 125 €123,14 Incl. VAT + Add to cart
Cruciform -BGM PRO- Vespa PX EFL 80cc (V8X1T since no. 100231), 125 cc (VNX2T since no. 232053), 150 cc (VLX1T since no. 624302), 200 cc (VSX1T since no. 315267), T5 125cc (VNX5T), 125 cc, Cosa
Cosa 125 €16,45 Incl. VAT + Add to cart
Crankcase gasket -BGM Pro silicone- Vespa PX80,PX125, PX150, PX200, Sprint Veloce, Rally 200, Cosa 125, Cosa 150, Cosa200
Cosa 125 €8,31 Incl. VAT + Add to cart
Related Products
Crimp terminal – male spade connector 2.8mm Ø=0.5-1.0mm²- DIN 46244 – 10 pcs
Frame €1,67 Incl. VAT + Add to cart
GASKET SET VESPA PX TSV D.66 C/57
Cosa 125
€19,24 €16,44 Incl. VAT
+ Add to cart
Kickstart lever-BGM ORIGINAL- Vespa PX, PE, Cosa – aluminium
Engine €24,36 + Add to cart
Kickstart spring -OEM QUALITY- Vespa Wideframe V98, V1-V15, V30-V33, VM, VN, VL, VB, GS150 / GS3 (VS1T-VS5T)
ACMA €8,18 Incl. VAT + Add to cart
Be the first to review “Oil seal 27x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (-1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint (since 1972), TS (since 1972), GT125 (since 1972), GTR125 (since 1972), GL150 (VLA1T) (since 1972))”