Ball bearing set for engine -SCOOTER CENTER- Vespa Largeframe GTR125 (VNL2T 145901-), TS125 (VNL3T 18139-), Sprint150 Veloce (VLB1T 294260-), P125X (VNX1T -146313), P150X (VLX1T -264564)
- Description
- Reviews (0)
- Add a review
Description
Scooter Center ball bearing sets for the fast and high-quality engine revision.
The bearing sets contain high-quality standard bearings from renowned companies such as SKF, FAG, INA or similar. Exceptions are the drawing bearings which are not available as standard bearings. These are manufactured in small series by specialized companies. Due to the small quantities involved, these are naturally expensive, but are of a very high quality.
The bearing sets always contain the ball or roller bearings fitted in the motor housing and the individual bearing needles used on the auxiliary shaft. The connecting rod bearing is not included in the set.
The set contains:
- 1x crankshaft clutch side: 25x62x12mm
- 1x crankshaft limo side (needle bearing): 25x38x15mm
- 1x auxiliary shaft:12x40x12mm
- 21x Auxiliary shaft needles: 2×11,8mm*
- 1X Main shaft wheel side: 20x47x14mm
- 1x Main shaft limo side (needle bearing): 29x35x12mm
*Please note: Some vehicles have auxiliary shaft needles with conical (“pointed”) ends. Often the corresponding auxiliary shaft does not have the necessary undercut for the supplied auxiliary shaft needles of later years of manufacture which have rounded ends. If the bearing surface of the auxiliary shaft is defective anyway (check for pitting marks), replace it with a new one, these automatically have enough space for the modern needle type.
Alternatively, the existing old bearing needles can often be retained. These are hardened and always more wear-resistant than the bearing surface on the auxiliary shaft itself.
Reviews (0)
- There are no reviews yet.
You may also like…
Cruciform -OEM QUALITY- Vespa PX old type 80 ccm (V8X1T until no. 100230), 125 cc (VNX2T until no. 232052), 150 cc (VLX1T until no. 624301), 200 cc (VSX1T until no. 315266), Rally180 (VSD1T) (since no. 26849), Rally200 (VSE1T) (since no. 4476)
Engine €15,86 Incl. VAT + Add to cart
Gear selector rod -OEM QUALITY- Vespa PX (-1984)
Engine €7,93 Incl. VAT + Add to cart
Washer gear selector rod -OEM QUALITY- PX (-1984)
Engine €3,68 Incl. VAT + Add to cart
Cylinder kit -PINASCO 177 cc ES 6 Ports Alloy Magny Cours- Vespa PX125, PX150, Cosa125, Cosa150, LML Star 125/150, Stella 125/150
Cosa 125
€351,88 €296,47 Incl. VAT
+ Add to cart
Related Products
Piston -BGM ORIGINAL- Vespa 200cc – Vespa PX200, Rally200, Cosa200 – 66.5mm
Engine €56,83 + Add to cart
Flywheel SIP Touren for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Cosa 125
€133,61 €120,25 Incl. VAT
+ Add to cart
Vespa GTS/GT/GTV 125-300 Front Brake Kit with Caliper PZ014 and Mounting Bracket
Brakes
€342,00 €285,91 Incl. VAT
+ Add to cart
NEW SPECIAL DEAL
GASKET SET VESPA PX TSV D.66 C/57
Cosa 125
€19,24 €16,44 Incl. VAT
+ Add to cart
Be the first to review “Ball bearing set for engine -SCOOTER CENTER- Vespa Largeframe GTR125 (VNL2T 145901-), TS125 (VNL3T 18139-), Sprint150 Veloce (VLB1T 294260-), P125X (VNX1T -146313), P150X (VLX1T -264564)”