Spring retainer – BGM PRO – Vespa, Lambretta, weld on type
Description
High quality retaining plate to hold two exhaust springs. Ideal supplement for converting exhaust systems to a plug-in flange with O-ring seal or as a replacement. When converting exhaust systems to a plugged flange with O-ring, the exhaust must be secured to the cylinder and/or engine case to prevent the flange from slipping off due to exhaust pressure. The retaining plate must be positioned on the manifold in such a way that the distance between the two points in which the spring is suspended is approx. 5 to 10mm further than the relaxed length of the spring. The shorter the selected exhaust spring is, the smaller should also be the measure that is selected as an allowance for tensioning the spring. As a rough rule, the tension should be about 10% of the relaxed length of the exhaust spring. AI-translation
Related Products
SIP ROAD XL VESPA PX 200
Cosa 200 €155,46 Incl. VAT + Add to cart
Resistor set for LED indicator -10W- Universal
Frame €5,03 Incl. VAT + Add to cart
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
ATHENA Top end gasket set Vespa GTS300 ’08-’17
Engine €43,53 Incl. VAT + Add to cart