Mirror -FA ITALIA Clip on- Chrome universal – round Ø=120mm – lhs

Mirror for mounting on a tubular handlebar of Ø20-22mm.
Chrome-plated steel, bracket galvanized
handlebar diameter: Ø20-22mm
mirror arm length approx. 18cm
Vertical lateral offset from screw-on point to mirror centre: 14cm
Mirror diameter: 12cm
Mirror thread at the mirror bottom: M10x1,5 (right)
thread length at the mirror below: 50mm
with E-marking
(US)
p>Note:
According to StVZO §56 every motor vehicle in Germany, which also includes mopeds, needs at least one mirror mounted on the left side of the vehicle.
NUMBER OF mirrors depends on the first registration (EZ):
EZ before 01.01.1990 1 mirror left
EZ from 01.01.1990 up to 100 km/h 1 mirror left
EZ from 01.01.1990 over 100 km/h 2 mirrors
SIZE
The size of the reflecting surface must be >/p>
before EZ 17.06.2003 at least 60cm² (for round mirrors the diameter is greater than or equal to 88 mm)
after EZ 17.6.2003 at least 69cm² (for round mirrors the diameter is greater than or equal to 94 mm)
betragen.
MIRRORS WITH TEST MARK:
Mirrors with test marks automatically fulfil all the above conditions.
Mirrors with test marks must be fitted to vehicles which are approved according to EC law (from 01.10.2005).
Vehicles with ABE approval (before 01.10.2005) must only use mirrors which meet the above criteria.
AI-translation