Spacer for clutch plates -BGM PRO- Vespa type Cosa2, PX (1995-), CR – 1,0mm – (optional needed, mounting position below circlip)
Description
If the coupling is rubbing on the cover, but the cover is already machined or turned out, it is usually due to a too thin lining package. Some manufacturers use thinner friction discs which increases the overall height of the clutch. The spacer offered here is placed under the large retaining ring to compensate the overall height and reduces the overall height again.
NOTE: Do not use to save yourself the need to rework the clutch cover. Otherwise it is possible that the separation path of the coupling becomes too small.
AI-translation
Related Products
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
Oil filter Vespa GTS 300 / 125 2008-2017
Engine
€8,45 €8,21 Incl. VAT
+ Add to cart
Ignition CDI unit Vespa PX80/125/150/200
Cosa 125 €26,31 Incl. VAT + Add to cart
Piston -BGM PRO 177/187cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) – Ø=63.0mm (A)
Engine €74,79 Incl. VAT + Add to cart