Oil seal 30x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (1984-1991), Piaggio 50-180 cc 2-stroke, Piaggio 50-100 cc 4-stroke)
- Description
- Reviews (0)
- Add a review
Description
BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM/Viton®*.
WHY FKM/VITON®
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
Current super fuel in Germany already contains up to 5% ethanol per se. In other countries the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with fuels containing ethanol. The BGM PRO FKM/Viton® rotary shaft seals offer perfect protection against this.
In addition, Viton is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to ageing.
FIT FO
R A motor equipped with BGM PRO FKM/Viton® shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown Viton®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM/Viton® shaft seals are therefore suitable for all engines, whether original or tuned high-performance engines.
ADVANTAGES BGM PRO
The BGM PRO shaft sealing rings offer double sealing as an additional feature. All shaft sealing rings that seal to the atmosphere have a so-called dust lip. This is positioned before the actual sealing lip and keeps dust, dirt and moisture away. This further increases the very good stability.
AVAILABLE
The BGM PRO FKM/Viton® oil seals are available individually as well as in sets for almost all Vespa and Lambrettas engines.
*Viton® is a registered trademark of DuPont Dow Elastomers
Reviews (0)
- There are no reviews yet.
Related Products
Hi-speed Variator 9 rollers Vespa 200/250/300
GTS 300 4T €149,14 Incl. VAT + Add to cart
Vespa GTS/GT/GTV 125-300 Front Brake Kit with Caliper PZ014 and Mounting Bracket
Brakes
€342,00 €285,91 Incl. VAT
+ Add to cart
NEW SPECIAL DEAL
ATHENA Top end gasket set Vespa GTS300 ’08-’17
Engine €43,53 Incl. VAT + Add to cart
Ignition CDI unit Vespa PX80/125/150/200
Cosa 125 €26,31 Incl. VAT + Add to cart
Be the first to review “Oil seal 30x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (1984-1991), Piaggio 50-180 cc 2-stroke, Piaggio 50-100 cc 4-stroke)”