VMC Racing Exhaust (handmade) STRADA – S3

STRADA – S3 Artisan Racing Exhaust for Vespa small frame 125 Et3, Primavera, 50 Special.

Made on the basis of the now classic Vmc Evo, this muffler takes its shape by slightly changing the technical characteristics

It is made with slightly different and less refined finishes than the Evo in order to be offered at a lower cost.

Mounts on Et3 frames with the side drawer, on Pk frames it is necessary to cut the bulkhead slightly to allow the expansion curve to pass through

On pre 1976 Primavera frames the drawer is deeper and could limit the assembly of the muffler.

Designed to give the best on 122/184 phases, it adapts to a wider range of phases.

It adapts very well to 130cc long stroke cylinders which have a 32mm exhaust diameter

Excellent for VMC GS-56/58, VMC ET6 and ET7, M1elle 56/60, Pinasco zuera, Polini 135cc evolution, Malossi 135 and similar thermal units

NB Assembly on cylinders with 52mm stud center distance is difficult.

It has a generous torque output from mid-range and over-revs that can reach over 10,000 rpm depending on the tuning fitted.

Transforms the sound of the Vespa engine from a classic scooter into a classic 2-stroke racing motorcycle.

AFTER USE, APPLY SOME OIL ON THE EXHAUST WHILE IT IS STILL HOT TO PREVENT THE FORMATION OF SURFACE RUST

TO ENSURE CONSISTENCY IN THE SALE OF THE EXHAUST, THE SILENCER CAN BE BLACK OR GRAY DEPENDING ON AVAILABILITY IN STOCK

WE RECOMMEND THE USE OF ROCK WOOL FOR SILENCERS IN RELATED MATERIALS