Gear cluster shaft set incl. bearing -BGM ORIGINAL- Vespa PX125, PX150, PX200, Cosa, T5 125cc – bearing seat: Ø=15mm, bushing: Ø=13mm, length: 121mm
- Description
- Reviews (0)
- Add a review
Description
High-precision BGM PRO auxiliary shaft axle for the bearing of the primary drive of the Vespa PX125-200 models. Here in a complete set incl. bearing, bearing needles and circlip. With this set you can mount a completely new auxiliary shaft. For fastening the auxiliary shaft axle we recommend the BGM safety set (BGM6503NKT). For a comprehensive revision we offer the primary repair kit from BGM (BGM0195F48). This contains reinforced springs, rivets and cover plates.
INFORMATION ABOUT THE BGM AUXILIARY SHAFT
Made from extremely strong and tempered 42CroMo4V steel.
Qualitatively not comparable with cheaper replicas.
This allows the primary drive to be repaired to 100% factory specification.
Mandatory equipment for tuned engines.
INFO: The auxiliary shaft axle has a bearing surface on which the needles of the alternator-side primary bearing run. While the needles hardly ever wear out, the bearing surface on the auxiliary shaft axle should be inspected more closely during every engine overhaul. Often there are already traces of pitting (material chipping). The auxiliary shaft axle should then be replaced, including the needles.
FITS :
- Vespa (Motovespa) Vespa 125 CL (engine 9CL)
- Vespa (Motovespa) Vespa 150 CL (engine 9NC)
- Vespa (Motovespa) Vespa 200 DS (engine 9DS)
- Vespa (Motovespa) Vespa 200 DN (engine 9DN)
- Vespa (Motovespa) PX 125 Iris (engine 99M)
- Vespa (Motovespa) PX 150 Iris (engine 75M)
- Vespa (Motovespa) PX 200 Iris (engine 73M)
- Vespa (Motovespa) PX 200 Iris (engine 76M)
- Vespa (Motovespa) PX 200 Iris (engine 77M)
- Vespa (Motovespa) PX 125 T5 Sport Elestart (engine 108M)
- Vespa (Motovespa) PX 125 T5 Sport (engine 98M)
- Vespa (Motovespa) TX 200
- Vespa (Piaggio) 125 PX E FL (2017-, ZAPM74100)
- Vespa (Piaggio) 150 PX E FL (2017-, ZAPM74200)
- Vespa (Piaggio) 125 PX E FL (2016-, ZAPM74100) special edition “70 years”
- Vespa (Piaggio) 150 PX E FL (2016-, ZAPM74200) special edition “70 years”
- Vespa (Piaggio) Cosa 150 CL (VLR1T)
- Vespa (Piaggio) Cosa 150 CLX (VLR1T300)
- Vespa (Piaggio) Cosa 150 FL (VLR2T)
- Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
- Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
- Vespa (Piaggio) Cosa 125 CL (VNR1T)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T300)
- Vespa (Piaggio) Cosa 125 CLX (VNR1T301)
- Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
- Vespa (Piaggio) PX 125 T5 (VNX5T)
- Vespa (Piaggio) Cosa 200 CL (VSR1T)
- Vespa (Piaggio) Cosa 200 CLX (VSR1T300)
- Vespa (Piaggio) Cosa 200 FL (VSR1T301)
- Vespa (Piaggio) P 200 E (VSX1T, -1980)
- Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
- Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
- Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
- Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
- Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
- Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
- Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
Reviews (0)
- There are no reviews yet.
You may also like…
BGM PRO BigBox SPORT (BBS)- Vespa PX80, PX125, PX150, Sprint, GT, GTR
Exhaust €164,46 Incl. VAT + Add to cart
Gear cluster shaft -BGM ORIGINAL- Vespa PX125, PX150, PX200, Cosa, T5 125cc – bearing seat: Ø=15mm, bushing: Ø=13mm, length: 121mm
Cosa 125 €21,40 Incl. VAT + Add to cart
Gear cluster -BGM PRO- Vespa PX200, Rally200 – 12-13-17-20 (and tuned PX 125-150)
Cosa 125 €197,52 Incl. VAT + Add to cart
SIP ROAD 3 VESPA PX 200
Cosa 200 €130,26 Incl. VAT + Add to cart
Crankshaft -BGM PRO, direct intake, stroke = 57mm, conrod = 110mm- Vespa Wideframe VM1T,VM2T, VN1T, VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 125 (19541955), ACMA 150GL (1956-1958), Motovespa 125N (1956-1958) – gudgeon pin Ø15mm (needle roller bea
ACMA €172,73 Incl. VAT + Add to cart
Related Products
Vespa GTS/GT/GTV 125-300 Front Brake Kit with Caliper PZ014 and Mounting Bracket
Brakes
€342,00 €285,91 Incl. VAT
+ Add to cart
NEW SPECIAL DEAL
Piston -BGM PRO 177/187cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) – Ø=63.0mm (A)
Engine €74,79 Incl. VAT + Add to cart
Resistor set for LED indicator -10W- Universal
Frame €5,03 Incl. VAT + Add to cart
Spacer cylinder head -BGM ORIGINAL Malossi 210 cc- Vespa PX200, Rally200 – 0.5mm
Engine €9,64 + Add to cart
Be the first to review “Gear cluster shaft set incl. bearing -BGM ORIGINAL- Vespa PX125, PX150, PX200, Cosa, T5 125cc – bearing seat: Ø=15mm, bushing: Ø=13mm, length: 121mm”