PINASCO 6 VOLT IGNITION “FLYTECH” for Vespa 125 V15-33/VM/VN/ACMA/150 VB1/VGL1/VL
- Description
- Reviews (0)
- Add a review
Description
Pinascos Flytech is a complete exchange alternator and ignition.
It offers besides a lower flywheel mass a dynamic ignition timing with 8° adjustment range. This results in a significantly improved acceleration behaviour as well as a higher operational reliability due to a reduced ignition angle with increasing speed.
The smaller fan blades with a newly calculated profile allow a noticeable and measurable increase in performance without reducing the cooling capacity in the upper speed range.
Compared to a Vespatronic or Vespower ignition the magnetic core of the Flytech is sealed off with a stable metal sheet. This protects the ignition base plate and coils from damage in the event of a magnet breaking. The ignition has a puller thread as it is used in the original rotor.
Ignition stator plate | |
---|---|
ignition type: | electronic |
tension: | 6V |
current: | alternating current (AC) |
type of rotor for stator: | external rotor |
position (pickup / points): | internal |
number of coils: | 4 |
diameter stator: | 115 mm |
diameter coils: | 84.5 mm |
total height: | 38 mm |
number of wires: | 4 |
type of plug connector: | single plug connector |
Rotor | |
weight of rotor: | 1600 g |
rotor type: | external rotor |
Ignition | |
ignition timing: | variable |
rotor incl.: YES | |
CDI incl.: YES | |
voltage regulator: YES |
FITS :
VESPA 125 | 125 | V1-15T | 2T AC | ’48-’50 | V15, 1950 |
VESPA 125 | 125 | V30-33 | 2T AC | ’51-’53 | |
VESPA 125 | 125 | VM1-2T | 2T AC | ’52-’54 | |
VESPA 125 | 125 | VN1-2T | 2T AC | ’54-’57 | |
VESPA 150 (T1/150) (D) | 150 | VL1T | 2T AC | ’55 | |
VESPA 150 (T2/150) (D) | 150 | VD1T | 2T AC | ’56 | |
VESPA 150 (T3/150) (D) | 150 | VD2T | 2T AC | ’57-’59 | |
VESPA 150 | 150 | VL1-3T | 2T AC | ’54-’57 | |
VESPA 150 | 150 | VB1T | 2T AC | ’57-’58 | |
VESPA 150 GL Touring (DK) | 150 | VGLA-B | 2T AC | ’57-’58 | |
VESPA ACMA 125 | 125 | 2T AC | ’51-’58 | ||
VESPA ACMA 150 GL | 150 | VGL1T | 2T AC | ’56-’58 |
Reviews (0)
- There are no reviews yet.
Related Products
Bearing driveshaft selector box 28,3×42,3×9,5 mm for Vespa 125 VNA/VNB/GT 1°/Super 1°/150 VBA/VBB/VGLA/B/GL/Sprint 1°/Super 1°
ACMA €21,85 Incl. VAT + Add to cart
Crimp terminal – male spade connector 2.8mm Ø=0.5-1.0mm²- DIN 46244 – 10 pcs
Frame €1,67 Incl. VAT + Add to cart
O-ring set for clutch cover (2 pcs) -BGM ORIGINAL- Vespa PX, T5, GT/GTR (VNL2), TS (VNL3), Super (VNC/VBC), GL150 (VLA), GL150 ACMA (VGL1), Sprint (VLB1), GS160 (VSB), Rally (VSD/VSE), SS180 (VSC), Cosa (VLR/VSR/VNR), Wideframe VM, VN, VNA, VNB, VB,
ACMA €1,57 Incl. VAT + Add to cart
BGM Manual Choke + Cable 150cm, universal
50 L (V5A1T) €14,83 Incl. VAT + Add to cart
Be the first to review “PINASCO 6 VOLT IGNITION “FLYTECH” for Vespa 125 V15-33/VM/VN/ACMA/150 VB1/VGL1/VL”