Crankshaft -BGM PRO, direct intake, stroke = 57mm, conrod = 110mm- Vespa Wideframe VM1T,VM2T, VN1T, VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 125 (19541955), ACMA 150GL (1956-1958), Motovespa 125N (1956-1958) – gudgeon pin Ø15mm (needle roller bea
- Description
- Reviews (0)
- Add a review
Description
BGM PRO crankshaft for Vespa Wideframe models made from high-alloy forging blanks. Ideally suited in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft is designed as a heavy-duty tuning crankshaft, but is of course also a clear recommendation as a virtually indestructible shaft for original engines.
- stroke: 57mm
- connecting rod length: 110mm
- piston pin: Ø15mm
- connecting rod bearing: Needle bearing (top and bottom)
A big advantage of the BGM PRO crankshaft compared to an original one is the use of a high quality connecting rod with needle bearing (instead of a plain bearing bush) as well as a slotted lower connecting rod eye. The oil consumption is reduced so that the engines with today’s high-quality oils can be run with 1:50 mixture without problems.
The balancing factor was improved by a hollow drilled pin.
The crankshaft is suitable for all 125ccm and 150ccm engines. The 125cc engines have a stroke of 54mm ex works, therefore a cylinder with a 57mm stroke is required (BGM1550, Pinasco Nordkap).
The BGM PRO Wideframe crankshaft fits the following vehicles:
- Vespa: VM, VN
- ACMA: 125 (70191 – 295883), GL150
- Motovespa 125N, 125S, V56, V58, V72
- Douglas GL2, 42L2, 92L2
Reviews (0)
- There are no reviews yet.
You may also like…
Cylinder -CC CORSA 160cc REED VALVE, Wideframe, Rod models, Ø=60mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T
ACMA €660,33 Incl. VAT + Add to cart
Related Products
Ignition CDI unit Vespa PX80/125/150/200
Cosa 125 €26,31 Incl. VAT + Add to cart
Vespa GTS/GT/GTV 125-300 Front Brake Kit with Caliper PZ014 and Mounting Bracket
Brakes
€342,00 €285,91 Incl. VAT
+ Add to cart
NEW SPECIAL DEAL
SIP ROAD XL VESPA PX 200
Cosa 200 €155,46 Incl. VAT + Add to cart
Cluch castle nut -BGM PRO- Vespa Largeframe models (-1995) – clutch nut
Engine €2,95 + Add to cart
Be the first to review “Crankshaft -BGM PRO, direct intake, stroke = 57mm, conrod = 110mm- Vespa Wideframe VM1T,VM2T, VN1T, VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 125 (19541955), ACMA 150GL (1956-1958), Motovespa 125N (1956-1958) – gudgeon pin Ø15mm (needle roller bea”